PROJECT:
Glazing Manufacturing
Application Details:
Blower room acoustic enclosure and inlet attenuator
SUPPLY SCOPE:
The blower room enclosure measured approx. 9.5m long x 7.8m wide 3.6m high, and was sat on a platform (supplied and installed by others), 4m above ground level. Acoustic panels for the platform floor were also supplied.
Inlet air for the blower plant was drawn through a large 5m wide x 3.6m high attenuator mounted on the side wall of the enclosure. The attenuator was extended out from the platform, and supported by means of a steel ‘goal-post’ frame.
Installation was undertaken on site, and required the use of a mini-crane for lifting of the components
PRODUCT SELECTION AND PERFORMANCE:
The enclosure and attenuator were selected to reduce noise levels to 80dBA within the factory, in order to reduce noise to the first action level of the Control of Noise at Work Regulations 2015.
Get In Touch
Engineering excellence in designing, manufacturing and installing industrial, commercial and environmental noise control products and systems.